Samsung Galaxy A3 2015 Battery Replacement

Introduction

If your Galaxy A3 won't hold a charge you can use this guide to replace the worn-out battery.

This guide involves removing the display and the mid frame. You will need replacement adhesive to reattach display.

Before disassembling your phone, discharge the battery below 25%. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.

Step 1 Display

Turn off your telephone. 

On the off chance that your screen is broken you need to cover the front board with tape to shield yourself from glass shards and improve hold to lift it. 

Utilize an iOpener to relax the paste on the edge of the showcase. Focus on the sides first and after that on the base part. 

With an iSclack or a suction handle you can lift the showcase a smidgen to get in the hole with an opening pick. 

First and foremost simply embed the very tip of the opening pick and slide at the edge to release the paste. Disregard the best and base until further notice. 

Alter

Step 2

• When the glue ist loosened enough on the side you can lift the display a little bit more to get underneath the display with an opening pick.
• Take a second opening pick and work your way just around the bottom edge.
  • Be careful where the two touch buttons at the bottom are (see next step for orientation). Take your time and be patient.
• Repeat the last step and this one on the other side.